How To Setup Asic Gridseed Miners & where to buy them Part 1

by gridseeds

Things you need,

Gridseed 10 Pack. Check out ebay for Europe and the UK the best priced one i found was here http://www.ebay.co.uk/itm/10-x-ASIC-gridseed-scrypt-duel-litecoin-bitcoin-miners-LTC-BTC-300-kh-s-UK-STOCK-/151251971778?pt=UK_Computing_Other_Computing_Networking&hash=item233751eec2

Accessories That you will need:

These can also be sourced from ebay and amazon. Buy the accessories separately to avoid higher prices.

01 Controller board for up to 20 devices/alternatively use a netbook, desktop or a raspberry pi more on this later. It is more stable to use a netbook or a raspberry pi instead of a wii controller board.

02 Power Supplies (Up to 5 devices per power supply)

11 Mini USB cables

10 Device Power Leads (Barrel plug to bare wire)

01 USB Hub

01 USB Hub Power Adapter

10 port USB Hub.  The HUB I received provided 1 Amp or 1000ma per port and 10 amps overall.

10 x bare wire 2.5mm ID x 5.5mm OD barrel plug to bare wire.

*There should have been 11.  The HUB runs on the same voltage and plug type. Not sure why jack didn’t set it up that way vs the power brick (Fire Hazard)

Two C13 to Your local power plug:

10 USB A to mini B cables

1 TP Link / wiibox controller with USB, Power Brick, and instructions

Here’s the gridseed box:

Open from the custom product end and tip the box upside down so the whole thing comes out.  Instead of fighting with it like all the youtube unboxings I’ve seen….

The Guts and Glory:

High Quality fan soldering:

COM Port: