Gridseed power usage guide with duel mode and script only mode
by gridseeds
Power Supply Efficiency: Corsair AX1200 80 Plus GOLD
Disconnected from controller – Fans/Leds, PSU, Controller, HUB
61.2 Watts
SHA only mode. It’s not even worth testing these in SHA only mode so I have excluded it.
Freq 600 Dual Mode
~2.5Mh/s scrypt (Controller)
~1.5Mh/s scrypt (scryptguild)
~80Gh/s sha (eligius)
429Watt
Freq 700 Dual Mode
~2.75Mh/s scrypt (Controller)
~1.8Mh/s scrypt (scryptguild)
~95Gh/s sha (eligius)
507Watt
Freq 800 Dual Mode
~2.5Mh/s scrypt (Controller)
~3Mh/s scrypt (scryptguild)
~120Gh/s sha (eligius)
583Watt
Freq 850 Dual Mode
~383Kh/s scrypt (Controller)
~383Kh/s scrypt (scryptguild)
~70Gh/s sha (eligius)
627Watt
Not sure where the power went. 900 is even worse so the bulk spot is between 700 and 800 on this set.
Temps were really boring in dual mode. The massive fan on these take away the heat very well which is new for an ASIC maker. Ambient 74F-78F Max device core 96F outflow air 86-90F.
Scrypt Mode: The power supply will be under 88% efficiency most likely 80-85% if you want device wattage multiply the results by .85Freq 600 Single Mode (Default Clocks)
~2.2Mh/s scrypt (Controller)
~2.2Mh/s scrypt (scryptguild)
88Watt
Freq 650 Single Mode (Default Clocks)
~2.6Mh/s scrypt (Controller)
~2.6Mh/s scrypt (scryptguild)
90Watt
Freq 700 Single Mode (Default Clocks)
~2.8Mh/s scrypt (Controller)
~2.8Mh/s scrypt (scryptguild)
92Watt
Freq 750 Single Mode
~2.9Mh/s scrypt (Controller)
~3Mh/s scrypt (scryptguild)
95Watt
Freq 800 Single Mode
~3Mh/s scrypt (Controller)
~2.8Mh/s scrypt (scryptguild)
97Watt
Freq 850 Single Mode
~3.2Mh/s scrypt (Controller)
~3.2Mh/s scrypt (scryptguild)
99Watt
Freq 900 Single Mode
~3.1Mh/s scrypt (Controller)
~3.1Mh/s scrypt (scryptguild)
103Watt