How To Setup Asic Gridseed Miners & where to buy them Part 2

by gridseeds

Part 2: Hacking together the Power

Now For Hacking together power

I’m on 110 here:

If you are lucky enough to have Chinese style power this would work.  This is from the lightening asic instructions…. Lol.

US POWERget some tools, or scissors:

Cut off the end of the power cord:

Peel back the coating to show the inner insulated wires:

Strip the three wires:

Place the wires on the PSU correctly!

EU POWER1 –Get your supplied power cord:

2 –Get your Leatherman (seriously, everyone should have one), if you don’t have a Leatherman, scissors or a wire cutter will work as well Wink:

Just cut it! Make sure to cut the power supply end, not the end that should go into your power socket…

3 –Now strip the cut end. There should be three wires in there. EU power cables have a yellow/green wire, a blue wire and a brown wire. US power cables have a lighter blue, a grey and a black wire. Make sure to connect them to the power supply in the order I just told you. Like this:

Grab 5 of the barrel plug cords:

#1 and 2

#3 and 4

#5

Fully wired:

Power usage while idle, IE just the PSU:

Spot CFM:

Part 3 coming up